X3 SPRiNKLE

The perfect case for your XTEINK X3 e-reader! 

This case uses your magnetic ring included with your XTEINK X3. Don't peel the brown tape off. The magnetic ring can be reused and hot swapped between SPRiNKLE cases if you have multiple colors/mixing and matching. 

The SPRiNKLE case comes included with a screen cover as well! So you're device will be protected with full body coverage. 

Recesses exist in the case for the reset button to be pressed with a thin object such as a small Alen wrench. The front buttons are also covered by the SPRiNKLE cover, and the rear chassis does display the charging status LED light. 

Buttons are easy to press, and return smoothly. 

To assemble:
1. Lay the base on a flat surface. 
2. Place the X4 Pro device into the base plate. 
3. Insert side and power buttons. 
4. Insert magnetic ring into top plate. Included with your case is a plastic ring to keep the magnetic ring in place. Place the plastic ring over the magnetic ring then slide top plate over the rear top of the X4 Pro carefully. The parts are plastic, if they are not going together smoothly do not force the parts, separate them and try again.
5. Slide bottom plate up while holding the top plate in place. It helps to put a finger on either side of the top plate where the clips are, to prevent any extra stress or pressure to the area. 

*X3 and magnetic ring not included.